CPR-Produktfinder

CONFill®, CONLink®, CONGuard® halogenfreie, flammwidrige Compounds für Ihre CPR Anforderungen

Die europäische Bauproduktenverordnung (BauPVo) EU 305/2011 bzw. Construction Products Regulation (CPR) ist eine in der EU gültige Rechtsverordnung, welche einheitliche Produkt- und Prüfstandards für Bauprodukte festlegt. Bauprodukte sind laut Verordnung alle Güter, die dauerhaft in Gebäuden verbaut werden. Die Verordnung definiert grundlegende Sicherheitsanforderungen an Bauwerke, eine davon ist der Brandschutz.Sie ist für alle Mitgliedsstaaten der europäischen Union (EU) verbindlich und schließt seit 01. Juli 2017 auch Kabel und Leitungen ein, die in Bauwerken dauerhaft fest verlegt werden.

Condor Compounds ist seit den Anfängen der CPR führend in der Entwicklung und Produktion halogenfreier, flammwidriger Compounds und bietet Lösungen für sämtliche Kabelkonstruktionen von CPR Klasse D bis Bca.

CONFill®

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONFill®	LOI	CPR Class indication (Dependent on construction)	Mooney Viscosity ML(1+4)100°C	Density	Shore A	Comments
	% [O2]		[g/10 min.]	[g/cm³]
CONFill® 640	40	Dca-Cca	27	1,87	75	easy processing
CONFill® 5355	55	Dca-Cca	45	1,93	84	drumable - suitable for coextrusion
CONFill® 5365	70	Dca-B2ca	45	1,91	85	drumable - no sticking with XLPE
CONFill® 5375	70	Dca-B2ca	45	1,83	77	drumable - suitable for coextrusion
CONFill® 5350	100	Cca-B2ca	50	1,87	73	drumable - suitable for coextrusion
CONFill® 100		Eca	25	1,93	85	high extrusion speed - PVC without softener migration
CONFill® 2550		Eca	34	1,89	88	XLPE - PVC construction

CONGuard®

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONGuard®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONGuard® I 4400	32		6,0	1,46	12 / 1740	200	EN 50363-7 TI6/ TI7, EN 50290-2-26	moderate flame resistance - 90°C continuous service temperature
CONGuard® S 6680	32	Eca	4,0	1,48	11 / 1600	250	HM2, CENELEC HD 624.7 S1 BS 6500	Highly flexible - 70°C continuous service temperature
CONGuard® S 6614 SK LDD UV	35	Dca -s1,d1,a1	9,0	1,53	11 / 1600	160	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - 90°C continuous service temperature
CONGuard® S 6625 S LDD UV	36	Dca -s1,d1,a1	6,5	1,50	12 / 1810	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Easy processing - low die drool - designed for shotgun profiles - 90°C continuous service temperature
CONGuard® S 6610 LDD UV	37	Dca -s1,d1,a1	10,0	1,52	11 / 1600	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High speed - low die drool - low shrinkage - 90°C continuous service temperature
CONGuard® S 6640 S N	37	Cca -s1,d0,a1	3,1	1,50	12 / 1740	180	BS 7629-1, EN 50200	Very good char forming compound - very good processing characteristic - 90°C continuous service temperature
CONGuard® S 6640 S LDD UV	37	Cca -s1,d1,a1	5,0	1,53	12 / 1740	180	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	for fibre optic cables with low attenuation after dynamic temperature cycling test - 90°C continuous service temperature
CONGuard® I 4750	38	Cca -s1,d1,a1	5,0	1,56	11 / 1600	170	EN 50363-7 TI6/ TI7, EN 50290-2-26	good electrical values - suitable for single core cables - 90°C continuous service temperature
CONGuard S 6690 S	41	Cca -s1,d1,a1	5,0	1,58	11 / 1600	165	EN 50290-2-27, IEC 60092-360 SHF1, IEC 60502 ST8; HM2, EN 50363-8 TM7, BS 6724, UNE 21123	Flexible material - 70°C continuous service temperature
CONGuard® S 6545 N	43	B2ca -s1,d0,a1	4,0	1,57	11,5/ 1668	150	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-8, BS 7655 LTS1-4; BS 7629-1, EN 50200; UNE 21123-3	Very good char forming compound - 90°C continuous service temperature
CONGuard® S 8543 LDD UV	43	B2ca -s1,d1,a1	4,0	1,60	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - optimised price-performance ratio - 90°C continuous service temperature
CONGuard® I 6541 LDD TB	45	Dca -s1,d1,a1	7,0	1,57	12 / 1740	170	EN 50290-2-27, IEC 60092 SHF1, HM2, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Very low shrinkage - no die drool - for tight buffer - 70°C continuous service temperature
CONGuard® S 6650 S LDD UV	45	B2ca -s1,d1,a1	3,0	1,60	11 / 1600	170	EN 50290-2-27, HM2, EN 50363-8, BS 6724, BS 7655 LTS 1/3; UNE 21123	High flame resistance - char forming with good flexibility - 70°C continuous service temperature
CONGuard® S 6650 MAA LDD UV NP	47	B2ca -s1,d0,a1	4,0	1,61	11 / 1600	140	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	High flame resistance - char forming - designed for B2 at loose tube constructions - 90°C continuous service temperature
CONGuard® S 8850 S LDD UV	48	B2ca -s1,d0,a1	2,5	1,62	12,5 / 1810	160	EN 50290-2-27, IEC 60092 SHF1, HM4, EN 50363-7, BS 7655 LTS1-4; UNE 21123-3	Highest flame resistance - very good crack resistance - 90°C continuous service temperature

CONLink®

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CONLink®	LOI	CPR Class indication (Dependent on construction)	MfR 150°C; 21,6 kg	Density	Tensile Strength	Elongation	Standards	Comments
	% [O2]		[g/10 min.]	[g/cm³]	[MPa] / [psi]	[%]
CONLink® I 4150 SC	26	Cca -s1,d1,a1	8,5	1,32	12,5 / 1810	250	EN 50618, DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Insulation Compound für PV-Cables - very good electrical properties
CONLink® S 5150 SC LDD	32	Cca -s1,d0,a1	5	1,50	13 / 1886	170	EN 50618	Sheating Compound for PV-Cables - Weather and UV resistance
CONLink® I 4115 SC	34	Cca -s1,d0,a1	5,5	1,50	13 / 1886	170	DIN VDE 0266 HXI1, IEC 60092-360 HF 90, BS 7211 EI5	Ambient cure cross-linkable fire retardant insulation material

CPR-Produktfinder

Kontakt

Zentrale

CONDOR COMPOUNDS GmbH

Als Zulieferer der Kabelindustrie hat Condor Compounds viele Innovation begleitet. In Hinblick auf die nächsten Jahre wird das Thema Nachhaltigkeit die gesamte Branche beschäftigen und schon heute ist Condor in diesem Bereich vielfältig engagiert. Der Einsatz von Recycling-Produkten trägt maßgeblich dazu bei, zukunftsfähige Lösungen zu entwickeln.

Um dieses Ziel erfolgreich weiter zu verfolgen, ist der Nachhaltigkeitsgedanke fest in unserer unternehmerischen DNA verankert. Darüber hinaus stehen wir für Verlässlichkeit in jeder Hinsicht. Qualität ist uns genauso wichtig wie eine termingerechte Lieferung – und das immer mit den Wünschen unserer Kunden im Fokus.

Hansestrasse 68 38112 Braunschweig Deutschland

+49 531 21024-0

+49 531 21024-38